1
1 40X2169 Scanner cover plug, rear
2
3
4
5
7
8
9
10
12
13
15
18
20
19
21 40X4123 touch screen bezel
22
23
24
31
32
|
 |
1
2 40X1868 Print cartridge clamp assembly
3
4
5
6
7
8
9
11
12
13
14
|
 |
1
2
3
4
5
6
7
8
9
10
11
|
 |
1
2
3
4
5 40X4352 Duplex guide, rear
6 40X4353 Duplex guide spring, rear
7 40X4349 Duplex guide spring, right
8
9 40X5551 Duplex guide spring, left
10
11 40X4345 Duplex input sensor assembly
12 40X4350 Duplex drive belt, lower
13
14
15 40X1863 Option drive shaft with spring
16
17
18
19
|
 |
1
1
2
2
3
4
5
6 40X4383 Cleaning blade contact
7 40X4381 Drum grounding contact
8 40X4382 Print cartridge HV contact
9
10
11
12 40X4317 Charge roll link spring, right
13
14
15
16
17
18
19
20
21 40X1864 Print cartridge ID connector assembly
22
23
24 40X4372 Sensor (standard bin exit) assembly
25
26
27
|
 |
1 40X4383 Cleaning blade contact
2 40X4381 Drum grounding contact
3 40X4382 Print cartridge HV contact
4
5
6 40X4361 HVPS / sensor cable assembly
7
8
9
10
11
12
12
13
14
15
17
Warning:When replacing any of the following components:
- - Scanner interface card assembly
- - System card assembly
- - Scanner unit assembly
Only replace one component at a time. replace the required
component and perform a POR before replacing
a second component listed above. If this procedure is not
followed, the printer will be rendered inoperable.
Never replace two or more of the components listed above
without a POR after installing each one or the
printer will be rendered inoperable.
These components can be used as a method of troubleshooting
as long as the machine is booted into
diagnostic mode or is operating in diagnostic mode. Once a
component has been installed in a machine and
powered up into user mode, it cannot be used in another
machine. It must be returned to the manufacturer. |
 |
1
2
3
4
5
40X4356 Fan
Fully refurbished with 90-day warranty
40X4356
$11.46
6
7
8 40X1866 Sensor shield assembly
9
10
|
 |
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Warning: When replacing any of the following components:
- - Scanner interface card assembly
- - System card assembly
- - Scanner unit assembly
Only replace one component at a time. replace the required
component and perform a POR before replacing
a second component listed above. If this procedure is not
followed, the printer will be rendered inoperable.
Never replace two or more of the components listed above
without a POR after installing each one or the printer will
be rendered inoperable.
These components can be used as a method of troubleshooting
as long as the machine is booted into diagnostic mode or is
operating in diagnostic mode. Once a component has been
installed in a machine and powered up into user mode, it
cannot be used in another machine. It must be returned to
the manufacturer. |
 |
1
|
 |
1
2
3 40X2746 ADF cover cap, rear left
4
5
6
7
8
9
10
11
12
|
 |
1
2 40X4545 Spring
3
4
5 40X2759 Transport drive gear and pulley kit, rear
6
7
8
9
10 40X2761 Pick roll position cam assembly
11
12
13 40X2750 Bushing 6 mm |
 |
1
2
3 40X2746 ADF cover cap, rear left
4
5
6
7
8
9
10
11
12
|
|
1 40X6398 Spacer
2
3
4
5 40X4606 Sensor (ADF media exit) bracket assembly
6 40X4549 Sensor (ADF media exit)
8
9 40X4557 ADF closed interlock switch cable assembly
10 40X3142 ADF controller card assembly
11 40X4554 Switch (ADF closed interlock)
13 40X3272 ADF duplex deletion insert
16 40X2762 Sensor (ADF 2nd scan)
17 40X4549 Sensor (ADF lower door interlock)
18 40X4560 ADF sensor cable assembly 2
19
20
21
22 40X4549 Sensor (ADF top door interlock) |
 |
1
2
3
4
5 40X4369 Sensor (media low)
6 40X4369 Sensor (media empty)
7 40X4309 250 Sheet media out actuator
8 40X4570 Anti-tip latch assembly
9
10 40X4395 Media tray roller catch assembly
11 40X3822 Media tray catch spring
12
13 40X4575 Sensor (pass through) with cable
14 40X4572 Lower interface cable assembly
15 40X1863 250 Option drive shaft with spring
16 40X3854 Media size actuator
17
18 40X4571 Upper interface cable assembly |
 |
1
2 40X3454 550 Sheet pick arm bracket assembly
3 40X4307 550 Sheet bellcrank recoil spring
4
5 40X4369 Sensor (media low)
6 40X4369 Sensor (media empty)
7 40X4310 550 Sheet media out actuator
8 40X4570 2 2 Anti-tip latch assembly
9
10 40X4395 Media tray roller catch assembly
11 40X3822 Media tray catch spring
12
13
14 40X4572 Lower interface cable assembly
15
16
17
18 40X4571 Upper interface cable assembly |
|
1
2
3
4
5
6 40X4369 Sensor (media low)
8 40X4369 Sensor (media empty)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
|
 |
1
|
 |
1
2
3 40X4730 Stapler cover
4 40X4764 Hollow cover
5
6 40X5544 Sensor (bin full receive)
7 40X4617 Finisher bin spring
8
9 40X5727 LED clear lens
10 40X5720 LED sensor cover
11 40X4618 Sensor (finisher bin media present)
12 40X4619 Media output bin extension
13 40X5541 Media output bin
14 40X4626 Sensor (bin full send)
15
16 40X5751 Attach roller
17
18
19
|
 |
1 40X4645 Media stack flap actuator
2 40X4646 Media stack flap
3 40X4369 Sensor (media stack)
4
5
6 40X4624 Tamper recoil spring
7 40X4369 Sensor (tamper HP right)
8 40X4369 Sensor (tamper HP left)
9 40X4623 Tamper drive belt
10 40X4369 Sensor (paddle HP)
11
|
 |
1
2 40X5909 Sensor (media in stapler) |
 |
| 1 40X7025 MFP offset stacker assembly (comes
completely assembled) |
 |
1
2
3 40X4730 Stapler cover
4
5 40X5544 Sensor (bin full receive)
6 40X4617 Finisher bin spring
7
8 40X5727 LED clear lens
9 40X5720 LED sensor cover
10 40X4618 Sensor (finisher bin media present)
11 40X4619 Media output bin extension
12 40X5541 Media output bin
13 40X4626 Sensor (bin full send)
14
15 40X5751 Attach roller
16
17
18 40X5906 Sensor (stapler/stacker pass through) |
 |
1 40X4645 Media stack flap actuator
2 40X4646 Media stack flap
3 40X4369 Sensor (media stack)
4
5
6 40X4624 Tamper recoil spring
7 40X4369 Sensor (tamper HP right)
8 40X4369 Sensor (tamper HP left)
9 40X4623 Tamper drive belt
10 40X4369 Sensor (paddle HP)
11
|
 |
1
|
 |
1
2
3 40X4135 1st - 3rd media bail
4
5
6
7
8
9
10
|
 |
1 40X5750 Spring
2 40X5728 Sensor (pass through)
3 40X4635 Deflector gate solenoid
4 40X5751 Attach roller
5 40X5545 Standard output bin LED
6 40X5727 LED clear lens
7
8 40X4136 Media bin full actuator
9 40X4633 Sensor (media bin full)
10
11
12
|
 |
